Over Temperature, Short Circuit, Under Voltage Lockout (UVLO)
Current - Quiescent (Iq)
220 µA
Voltage Dropout (Max)
0.32V @ 300mA
Max Input Voltage
6 V
PSRR
55dB (100Hz)
Seated Height-Max
1.45 mm
Dropout Voltage
200mV
Product Type
LDO Voltage Regulators
Dropout Voltage1-Nom
0.2V
Min Output Voltage
5V
Output Voltage1-Max
5.125 V
Output Voltage1-Min
4.875 V
Regulator Type
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR
Voltage Tolerance-Max
2.5%
Output Current1-Max
0.3 A
Voltage - Output (Max)
-
Dropout Voltage1-Max
0.32 V
Screening Level
Extended
Operating Temperature TJ-Max
125 °C
Input Voltage Absolute-Max
6.5 V
Nominal Output Voltage
5V
Input Bias Current
120μA
Output Voltage Accuracy
2.5 %
Adjustability
FIXED
Line Regulation
0.05 %/V
Operating Temperature TJ-Min
-40 °C
Output Voltage1-Nom
5 V
Load Regulation
0.5 %
Product
LDO Voltage Regulators
Product Category
LDO Voltage Regulators
Height
1.2954mm
Length
3.0988mm
Width
1.8034mm
REACH SVHC
No SVHC
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
Pricing & Ordering
Quantity
Unit Price
Ext. Price
3,000
$0.32960
$0.9888
MCP1824T-5002E/OT Product Details
MCP1824T-5002E/OT Overview
In a Tape & Reel (TR) case, the IC voltage regulator is delivered. A SC-74A, SOT-753 case contains the Liner IC. In total, there are 5 terminations on the gadget. This PMIC chip has an output type of Fixed. In this electrical part, there are 1 regulators that are implemented. Voltage Regulated IC Surface Mount varies its operating temperature range. The IC Voltage Regulator's operating temperature is -40°C~125°C degrees. Currently, this regulator IC has an output function configured as Positive as its output function. The current output of this IC regulator is 300mA. There are 5 pins in total on this board. Featuring 1 outputs in total, this voltage regulator IC enables prompt, sufficient performance regardless of the application. There is a 10 volt dropout voltage on this transistor. A 5-pin is present on the chip. It is MCP1824 for this voltage regulator IC, just for your information. In this case, the regulator type is FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR, which corresponds to this voltage regulator IC. A packing method for the IC regulator is TAPE AND REEL, which means it is packed in a certain way. A maximum output current of 300mA is required to meet the operation requirements. It operates in the 220μA Quiescent Current state. In fact, it is voltage regulator IC of the - Series of cameras. When the temperature is below 125 °C, you are advised to use the voltage regulator IC. The chip's operating temperature cannot be lowered below -40 °C. A 120 uA supply current is required for the voltage regulator IC to operate. The top supply voltage is 6V volts. Tolerance for this regulator IC is 2.5 %, which is very low.
MCP1824T-5002E/OT Features
200mV dropout voltage TAPE AND REEL method of packing The maximum operating temperature of -40 °C 2.5 % tolerance
MCP1824T-5002E/OT Applications
There are a lot of Microchip Technology MCP1824T-5002E/OT Linear Voltage Regulators applications.