Over Temperature, Short Circuit, Under Voltage Lockout (UVLO)
Current - Quiescent (Iq)
220µA
Voltage Dropout (Max)
0.4V @ 1A
Max Input Voltage
6 V
PSRR
60dB (100Hz)
Seated Height-Max
5.08 mm
Dropout Voltage
250mV
Product Type
LDO Voltage Regulators
Dropout Voltage1-Nom
0.25V
Output Voltage1-Max
0.82 V
Output Voltage1-Min
0.78 V
Regulator Type
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR
Voltage Tolerance-Max
2.5%
Output Current1-Max
1 A
Voltage - Output (Max)
--
Dropout Voltage1-Max
0.4 V
Screening Level
Extended
Operating Temperature TJ-Max
125 °C
Input Voltage Absolute-Max
6.5V
Input Bias Current
120μA
Output Voltage Accuracy
2 %
Adjustability
FIXED
Line Regulation
0.05 %/V
Operating Temperature TJ-Min
-40 °C
Output Voltage1-Nom
0.8 V
Load Regulation
0.5 %
Product Category
LDO Voltage Regulators
Height Seated (Max)
5.08mm
Width
9.017 mm
Length
10.16 mm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
Pricing & Ordering
Quantity
Unit Price
Ext. Price
750
$0.76220
$571.65
MCP1826ST-0802E/EB Product Details
MCP1826ST-0802E/EB Overview
Tape & Reel (TR) cases are used for delivery. The Liner regulator IC is packaged in TO-263-4, D2Pak (3 Leads + Tab), TO-263AA case. On the Linear IC itself, there are 3 terminations. Fixed is the output type of the Voltage Regulator IC. As part of this electrical component, 1 regulators are implemented. Variations are made to the Surface Mount operating temperature range by the Voltage Regulator IC. Default settings are set to -40°C~125°C degrees. There is a Positive configured as the output function for this IC regulator. There is a current output of 1A from this regulator IC. There are a total of 3 pins on this board. There are 1 outputs total on this voltage regulator IC in order to ensure that prompt and sufficient performance is achieved. There is a dropout voltage of 10 volts on this IC regulator. Chips have 3 pins. For your information, the basic part number for this regulator IC is MCP1826S. There is one type of regulator for this device, which is FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR. TAPE AND REEL is the way in which the voltage regulator IC is packed. It operates in the 220μA Quiescent Current state. This IC regulator is a part of the -- Series of devices. You should use the regulator IC when the temperature is below 125 °C. It is not possible to operate the chip below -40 °C operating temperature.
MCP1826ST-0802E/EB Features
250mV dropout voltage TAPE AND REEL method of packing The maximum operating temperature of -40 °C
MCP1826ST-0802E/EB Applications
There are a lot of Microchip Technology MCP1826ST-0802E/EB Linear Voltage Regulators applications.