Over Temperature, Short Circuit, Under Voltage Lockout (UVLO)
Current - Quiescent (Iq)
220μA
Voltage Dropout (Max)
0.6V @ 1.5A
PSRR
60dB (100Hz)
Seated Height-Max
5.08 mm
Dropout Voltage
330mV
Product Type
LDO Voltage Regulators
Dropout Voltage1-Nom
0.33V
Min Output Voltage
3.3V
Output Voltage1-Max
3.382 V
Output Voltage1-Min
3.217 V
Regulator Type
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR
Voltage Tolerance-Max
2.5%
Output Current1-Max
1.5 A
Voltage - Output (Max)
--
Dropout Voltage1-Max
0.6 V
Screening Level
Extended Industrial
Operating Temperature TJ-Max
125 °C
Input Voltage Absolute-Max
6.5 V
Input Bias Current
120μA
Output Voltage Accuracy
2 %
Adjustability
FIXED
Line Regulation
0.05 %/V
Operating Temperature TJ-Min
-40 °C
Output Voltage1-Nom
3.3 V
Load Regulation
0.5 %
Input Voltage
6(V)
Product Category
LDO Voltage Regulators
Height Seated (Max)
5.08mm
Width
4.65 mm
Height
10.41 mm
Length
9.4 mm
RoHS Status
ROHS3 Compliant
Radiation Hardening
No
Lead Free
Lead Free
Pricing & Ordering
Quantity
Unit Price
Ext. Price
1
$1.78000
$1.78
500
$1.7622
$881.1
1000
$1.7444
$1744.4
1500
$1.7266
$2589.9
2000
$1.7088
$3417.6
2500
$1.691
$4227.5
MCP1827ST-3302E/EB Product Details
MCP1827ST-3302E/EB Overview
In a Tape & Reel (TR) case, the IC voltage regulator is delivered. A TO-263-4, D2Pak (3 Leads + Tab), TO-263AA case contains the Liner IC. In total, there are 3 terminations on the gadget. This PMIC chip has an output type of Fixed. In this electrical part, there are 1 regulators that are implemented. Voltage Regulated IC Surface Mount varies its operating temperature range. The IC Voltage Regulator's operating temperature is -40°C~125°C degrees. Currently, this regulator IC has an output function configured as Positive as its output function. The current output of this IC regulator is 1.5A. There are 3 pins in total on this board. Featuring 1 outputs in total, this voltage regulator IC enables prompt, sufficient performance regardless of the application. There is a 10 volt dropout voltage on this transistor. A 3-pin is present on the chip. It is MCP1827S for this voltage regulator IC, just for your information. In this case, the regulator type is FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR, which corresponds to this voltage regulator IC. A packing method for the IC regulator is TAPE AND REEL, which means it is packed in a certain way. A maximum output current of 1.5A is required to meet the operation requirements. It operates in the 120μA Quiescent Current state. In fact, it is voltage regulator IC of the -- Series of cameras.
MCP1827ST-3302E/EB Features
330mV dropout voltage TAPE AND REEL method of packing
MCP1827ST-3302E/EB Applications
There are a lot of Microchip Technology MCP1827ST-3302E/EB Linear Voltage Regulators applications.