MCP3422A1T-E/SN Overview

The analogue to digital converter is designed with 18 Bits.The AD converter is embedded in the 8-SOIC (0.154, 3.90mm Width) package.The ADC converter is packaged in the way of Tape & Reel (TR).The ADC converter is equipped with 1 Functions .There are 8 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 2 channels.The is equipped with 8 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, DELTA-SIGMA converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~125°C.The number of samples of audio recorded every second is 3.75 Hz.The input type of this electronic AD converter is Differential.There are Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-PGA-ADC.The architecture that analogue to digital converter's core adopts is Sigma-Delta.There are 8 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.7V~5.5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 2.25 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to MCP3422 family.The supply/digital voltage of this electrical AD converter is 2.7V~5.5V.Surface Mount is a device that can be mounted on the digital converter.The ADC converter operates with the maximal supply voltage of 5.5V.2 inputs are employed.It operates with the minimal supply voltage of 2.7V.The ADC converter operates from 3/5V power supplies.The conversion rate of this electrical AD converter is calculated as 3.75 sps.There are 1 A/D converters, which are used to convert an analog signal like voltage to digital form so that it can be read and processed by a microcontroller. PGA can be ensured when operating.

MCP3422A1T-E/SN Features

1 Functions
8 basic kinds of terminations
8 pin count
Minimal supply voltage of 2.7V
3/5V power supplies

MCP3422A1T-E/SN Applications

There are a lot of Microchip Technology MCP3422A1T-E/SN ADC applications.

• Multicarrier, multimode digital receivers
• TD-SCDMA, WiMAX
• GSM, EDGE, PHS, UMTS, WCDMA, CDMA2000,
• Digital Multimeters, PLC's (Programming Logic Controllers)
• Transducer
• Scientific instruments
• Scientific instruments.
• Wireless and wired broadband communications
• Digital Storage Oscilloscope
• Displaying