MCP3426A3-E/MS Overview

The analogue to digital converter is designed with 16 Bits.The AD converter is embedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 8 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 2 channels.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, DELTA-SIGMA converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~125°C.The number of samples of audio recorded every second is 15 Hz.The input type of this electronic AD converter is Differential.There are Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-PGA-ADC.The architecture that analogue to digital converter's core adopts is Sigma-Delta.There are 8 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.7V~5.5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 2 B, which is on a display or in a camera sensor (specifically in a digital image).It belongs to MCP3426 family.The supply/digital voltage of this electrical AD converter is 2.7V~5.5V.Mounting the ADC converter is possible with Surface Mount.The ADC converter operates with the maximal supply voltage of 5.5V.2 inputs are employed.It operates with the minimal supply voltage of 2.7V.There are 1 A/D converters, which are used to convert an analog signal like voltage to digital form so that it can be read and processed by a microcontroller. The minimal analog input voltage of this electrical AD converter is -0.3V.PGA can be ensured when operating.

MCP3426A3-E/MS Features

1 Functions
8 basic kinds of terminations
Minimal supply voltage of 2.7V

MCP3426A3-E/MS Applications

There are a lot of Microchip Technology MCP3426A3-E/MS ADC applications.

• Microcontrollers.
• Communication test equipment
• Multiplexed Data Acquisition Systems
• AC motor control
• Scientific instruments
• CMOS Image sensors for mobile applications
• Automotive
• RADAR processing, digital oscilloscopes
• Uninterrupted Power Supplies
• Music recording