MCP4706A1T-E/CH Overview

The package that contains this software is called SOT-23-6. It is powered from a supply voltage of 5.5V. Other Converters family FPGA part. An FPGA module can be attached to a development board with a Surface Mount-pin. Operating temperatures should be maintained within the -40°C~125°C range at all times when the unit is in use. A model of this FPGA is contained in Tape & Reel (TR) for the purpose of saving space. In total, there are a total of 6 terminations on it. If you are looking for related parts, you can use the base part number MCP4706 as a starting point. In this case, there are 6 pins on the board. In order for this FPGA to work properly in accordance with its specifications, it is necessary that it is mounted in Surface Mount. An external power supply of 3/5V is required to power the device. A total of 6 pins are included in this device. In addition, it is able to support a maximum supply voltage of 5.5V. Using a supply voltage as low as 2.7V, it will work.

MCP4706A1T-E/CH Features

SOT-23-6 package
6 pin count
6 pins

MCP4706A1T-E/CH Applications

There are a lot of Microchip Technology MCP4706A1T-E/CH Digital to Analog Converters (DAC)?applications.

• WCDMA, CDMA2000, TD-SCDMA, WiMAX
• Function Generaion
• RF signal generators, arbitrary waveform generators
• Digital Calibration
• Servo controls
• Synchro Applications
• Portable Equipment
• Closed-loop process control
• Data Distribution System
• Low bandwidth data acquisition systems