Welcome to Hotenda.com Online Store!

logo
userjoin
Home

MCP602-I/P

MCP602-I/P

MCP602-I/P

Microchip Technology

2 Channels 22mA per Channel 1pA 75 dB Instrumentational OP Amps 0.00006μA 5.5V 2.7V~6V MCP602 8 Pins 8-DIP (0.300, 7.62mm)

SOT-23

MCP602-I/P Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 10 Weeks
Mount Through Hole
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tube
Published 2000
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Matte Tin (Sn)
Subcategory Operational Amplifier
Technology CMOS
Terminal Position DUAL
Number of Functions 2
Supply Voltage 5V
Base Part Number MCP602
Pin Count 8
Output Type Rail-to-Rail
Operating Supply Voltage 5.5V
Power Supplies 3/5V
Number of Channels 2
Operating Supply Current 230μA
Nominal Supply Current 230μA
Output Current 22mA
Slew Rate 2.3V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 75 dB
Current - Input Bias 1pA
Voltage - Supply, Single/Dual (±) 2.7V~6V
Output Current per Channel 22mA
Input Offset Voltage (Vos) 2mV
Bandwidth 2.8MHz
Unity Gain BW-Nom 2800 kHz
Voltage Gain 115dB
Average Bias Current-Max (IIB) 0.00006μA
Power Supply Rejection Ratio (PSRR) 80dB
Low-Offset NO
Frequency Compensation YES
Supply Voltage Limit-Max 7V
Voltage - Input Offset 700μV
Low-Bias YES
Micropower YES
Height 4.953mm
Length 10.16mm
Width 7.112mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Pricing & Ordering
Quantity Unit Price Ext. Price
1 $0.59000 $0.59
25 $0.49440 $12.36
100 $0.44290 $44.29
MCP602-I/P Product Details

MCP602-I/P Overview


Op amp is packaged in 8-DIP (0.300, 7.62mm) case. Op amps are General Purpose types of amplifier on the chip. Instrumentation amplifier is delivered in a Tube case. There have been a total of 8 terminations over the past year. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 8 pins are located on the operational amplifiers. In terms of the input offset voltage, instrumentation amplifier rates at 2mV. The mounting type that is recommended for this electrical part is Through Hole. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 230μA and 10 . It is a member of the 115dB's 115dB family. As far as the device is concerned, buffer amplifier has 2 channels. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The operating supply voltage of the buffer op amp is rated at 5.5V.

MCP602-I/P Features


8 Pins
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail

MCP602-I/P Applications


There are a lot of Microchip Technology MCP602-I/P Instrumentational OP Amps applications.

  • Voltage regulation circuit
  • Multiplication circuits
  • Signal amplification
  • Video data acquisition
  • High/low-pass filter circuit
  • earphone
  • Home audio systems
  • Power generator
  • Industrial control system
  • Broadcasting

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News