Welcome to Hotenda.com Online Store!

logo
userjoin
Home

MCP608-I/P

MCP608-I/P

MCP608-I/P

Microchip Technology

1 Channels 17mA per Channel 1pA 75 dB Instrumentational OP Amps 5.5V 2.5V~6V MCP608 8 Pins 8-DIP (0.300, 7.62mm)

SOT-23

MCP608-I/P Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 8 Weeks
Mount Through Hole
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tube
Published 2008
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Matte Tin (Sn)
Subcategory Operational Amplifier
Technology CMOS
Terminal Position DUAL
Peak Reflow Temperature (Cel) NOT APPLICABLE
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 2.54mm
[email protected] Reflow Temperature-Max (s) NOT APPLICABLE
Base Part Number MCP608
Pin Count 8
Qualification Status Not Qualified
Output Type Rail-to-Rail
Operating Supply Voltage 5.5V
Power Supplies 3/5V
Number of Channels 1
Operating Supply Current 18.7μA
Nominal Supply Current 25μA
Output Current 17mA
Slew Rate 0.08V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 75 dB
Current - Input Bias 1pA
Voltage - Supply, Single/Dual (±) 2.5V~6V
Output Current per Channel 17mA
Input Offset Voltage (Vos) 250μV
Bandwidth 155 kHz
Unity Gain BW-Nom 155 kHz
Voltage Gain 121dB
Power Supply Rejection Ratio (PSRR) 80dB
Low-Offset YES
Frequency Compensation YES
Supply Voltage Limit-Max 7V
Low-Bias YES
Micropower YES
Max Frequency 1kHz
Programmable Power NO
Height 4.953mm
Length 10.16mm
Width 7.112mm
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Pricing & Ordering
Quantity Unit Price Ext. Price
1 $0.80000 $0.8
25 $0.66960 $16.74
100 $0.60770 $60.77
MCP608-I/P Product Details

MCP608-I/P Overview


A 8-DIP (0.300, 7.62mm) case is used to package the op amp. A General Purpose-type buffer amplifier is shown here. Upon delivery, op amp ic is packaged in a Tube case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. The buffer op amp includes 8 pins. The input offset voltage is 250μV. This electronic component is recommended to be mounted using the mounting type Through Hole. With regard to operating temperature, this op amp functions well at -40°C~85°C. You can run this op amp ic on 18.7μA . Op amp is a member of the 121dB's 121dB family. There are a total of 1 channels available on the op amps. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 5.5V voltage.

MCP608-I/P Features


8 Pins
supply voltage of 5V
121dB voltage gain
Output Type: Rail-to-Rail

MCP608-I/P Applications


There are a lot of Microchip Technology MCP608-I/P Instrumentational OP Amps applications.

  • Ultrasound transducers
  • Video data acquisition
  • Hand-held batteries
  • Digital cameras
  • earphone
  • RF cable systems
  • Division circuits
  • Information processing
  • Integrator circuits
  • High-frequency data acquisition systems

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News