MCP6547T-E/MS Overview

In order to make transportation easier, it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .A comparator with an output type of CMOS, Open-Drain, Rail-to-Rail, TTL is being used.We ship the part through Tape & Reel (TR) .As you can see, the comparator has8 terminals.Electronic comparator is a part of Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.In general, the chip type can be classified as General Purpose .A total of 2 elements can be found in it.A total of 8 pins are included.A Surface Mount mounting type is recommended.A temperature setting of -40°C~125°C should be used for the operating temperature in order to prevent malfunctions.The comparator consists of 8 pins.Alternatively, you may search for MCP6547 to find more pin-to-pin solutions for your specific needs.There is 1μA current flowing in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.The device can be run with 1.6/5.5V power supplies.Electronic comparator is possible to input a maximum of 1pA current into the device.The part can be supplied with a minimum current of 0.001mA .

MCP6547T-E/MS Features

CMOS, Open-Drain, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 1μA

MCP6547T-E/MS Applications

There are a lot of Microchip Technology
MCP6547T-E/MS linear comparators applications.

• Current and voltage sensing
• Analog front end
• Power management
• Point of load regulators
• DC/DC and AC/DC power supplies
• System control and monitoring
• Wearable Devices
• Mobile Phones and Tablets
• Battery-Powered Electronics
• General Purpose Low Voltage Applications