10pA 98 dB Instrumentational OP Amps 0.025μA 3.5V~12V ±1.75V~6V 14-TSSOP (0.173, 4.40mm Width)
SOT-23
MCP6H94T-E/STVAO Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mounting Type
Surface Mount
Package / Case
14-TSSOP (0.173, 4.40mm Width)
Surface Mount
YES
Operating Temperature
-40°C~125°C TA
Packaging
Tape & Reel (TR)
Series
Automotive, AEC-Q100
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
14
Subcategory
Operational Amplifier
Technology
CMOS
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
NOT SPECIFIED
Number of Functions
4
Supply Voltage
5V
Terminal Pitch
0.65mm
[email protected] Reflow Temperature-Max (s)
NOT SPECIFIED
Output Type
Rail-to-Rail
Number of Circuits
4
Current - Supply
2mA
Slew Rate
10V/μs
Amplifier Type
General Purpose
Common Mode Rejection Ratio
98 dB
Current - Input Bias
10pA
Voltage - Supply, Single/Dual (±)
3.5V~12V ±1.75V~6V
Gain Bandwidth Product
10MHz
Unity Gain BW-Nom
10000 kHz
Average Bias Current-Max (IIB)
0.025μA
Supply Voltage Limit-Max
13.2V
Current - Output / Channel
41mA
Height Seated (Max)
1.2mm
Length
5mm
RoHS Status
ROHS3 Compliant
MCP6H94T-E/STVAO Product Details
MCP6H94T-E/STVAO Overview
There is a 14-TSSOP (0.173, 4.40mm Width) case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the General Purpose-type. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. There is a growing number of terminations approaching the number of 14. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. It is recommended that this electronic component be mounted using the Surface Mount mounting type. With regard to operating temperature, this op amp functions well at -40°C~125°C TA. There are 4 circuits on this op amp. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. As a result, it is recommended that a power supply of 2mA be used with this electronic part. Buffer op amp series numbers are indicated by the Automotive, AEC-Q100.
MCP6H94T-E/STVAO Features
supply voltage of 5V Output Type: Rail-to-Rail
MCP6H94T-E/STVAO Applications
There are a lot of Microchip Technology MCP6H94T-E/STVAO Instrumentational OP Amps applications.