MCP6S28T-I/SL Overview

Packaged in a 16-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. An op amp ic of the Programmable Gain type. The op amp is delivered to you in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 16. The pins on this board total to 16 in total. I would like to remind you that this buffer op amp should be powered by an 4V battery. I would like to specify that this buffer amplifier belongs to the Other Analog ICs-type of devices. A total of 16 pins are present on the instrumentation amplifier. There is an input offset voltage of 275μV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . As long as the supply current of the chip does not exceed 1mA, this op amp ic can operate. 30.1dB should remain the voltage gain. During the manufacturing process, this buffer amplifier is divided into 8 circuits. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Push-Pull, Rail-to-Rail signals. The linear amplifier consists of 1 different elements in total. The operating supply voltage of the buffer op amp is rated at 5V. Instrumentation amplifier resistance should stay within the range of 6.4kOhm. It should be noted that the other type of analog integrated circuit used in this instrumentation amplifier is known as the ANALOG CIRCUIT.

MCP6S28T-I/SL Features

16 Pins
supply voltage of 4V
30.1dB voltage gain
Output Type: Push-Pull, Rail-to-Rail
Resistance of 6.4kOhm

MCP6S28T-I/SL Applications

There are a lot of Microchip Technology
MCP6S28T-I/SL Instrumentational OP Amps applications.

• Integrator circuits
• Differentiator circuits
• Logarithmic operation circuits
• Exponential operation circuits
• Multiplication circuits
• Division circuits
• Precision measurement
• Power control
• Information processing
• Weak signal detection