MCP6S92-E/P Overview

Packaged in a 8-DIP (0.300, 7.62mm) case, the buffer op amp is ready to use. An op amp ic of the Programmable Gain type. The op amp is delivered to you in a Tube case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. I would like to specify that this buffer amplifier belongs to the Other Analog ICs-type of devices. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 4mV for this buffer op amp. The mounting type that is recommended for this electrical part is Through Hole. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . As long as the supply current of the chip does not exceed 1mA, this op amp ic can operate. 30.1dB should remain the voltage gain. During the manufacturing process, this buffer amplifier is divided into 2 circuits. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The linear amplifier consists of 1 different elements in total. The operating supply voltage of the buffer op amp is rated at 5V. Instrumentation amplifier resistance should stay within the range of 10 TΩ. It should be noted that the other type of analog integrated circuit used in this instrumentation amplifier is known as the ANALOG CIRCUIT.

MCP6S92-E/P Features

8 Pins
supply voltage of 5V
30.1dB voltage gain
Output Type: Rail-to-Rail
Resistance of 10 TΩ

MCP6S92-E/P Applications

There are a lot of Microchip Technology
MCP6S92-E/P Instrumentational OP Amps applications.

• Integrator circuits
• Differentiator circuits
• Logarithmic operation circuits
• Exponential operation circuits
• Multiplication circuits
• Division circuits
• Precision measurement
• Power control
• Information processing
• Weak signal detection