1pA 130 dB Instrumentational OP Amps 0.00005μA 2V~5.5V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
SOT-23
MCP6V72T-E/MSVAO Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mounting Type
Surface Mount
Package / Case
8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount
YES
Operating Temperature
-40°C~125°C TA
Packaging
Tape & Reel (TR)
Series
Automotive, AEC-Q100
Part Status
Active
Moisture Sensitivity Level (MSL)
2 (1 Year)
Number of Terminations
8
Subcategory
Operational Amplifier
Technology
CMOS
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
NOT SPECIFIED
Number of Functions
2
Supply Voltage
2V
Terminal Pitch
0.65mm
Time@Peak Reflow Temperature-Max (s)
NOT SPECIFIED
JESD-30 Code
S-PDSO-G8
Output Type
Rail-to-Rail
Number of Circuits
2
Current - Supply
170μA
Slew Rate
1V/μs
Amplifier Type
Zero-Drift
Common Mode Rejection Ratio
130 dB
Current - Input Bias
1pA
Voltage - Supply, Single/Dual (±)
2V~5.5V
Gain Bandwidth Product
2MHz
Unity Gain BW-Nom
2000 kHz
Average Bias Current-Max (IIB)
0.00005μA
Supply Voltage Limit-Max
6.5V
Voltage - Input Offset
8μV
Current - Output / Channel
26mA
Height Seated (Max)
1.1mm
Length
3mm
RoHS Status
ROHS3 Compliant
MCP6V72T-E/MSVAO Product Details
MCP6V72T-E/MSVAO Overview
In order to protect the op amps, a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It would be helpful if you could remember that this op amp ic should be powered by an 2V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C TA for optimal performance. In total, there are 2 circuits on this buffer amplifier. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. This electronic part is recommended to be used with an 170μA supply for best performance. Automotive, AEC-Q100 is the number that corresponds to the series of the buffer op amp.
MCP6V72T-E/MSVAO Features
supply voltage of 2V Output Type: Rail-to-Rail
MCP6V72T-E/MSVAO Applications
There are a lot of Microchip Technology MCP6V72T-E/MSVAO Instrumentational OP Amps applications.