There is a package named Tube that contains it.The product comes in the package of a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width).It appears that the device's mounting type is Surface Mount.It is best to set the temperature to -40°C~85°C TA.The device relies on an analog IC called POWER SUPPLY SUPPORT CIRCUIT to operate.To charge the device, there is a requirement for Constant - Programmable current.With the base part number MCP73833, it is possible to find related parts.It is possible to find a total of 10 terminations.A battery pack is going to have a voltage of 4.2V.With 10 pins on it, it has a very simple design.The unit is equipped with a number of programmable features, including Current.At the maximum charging current, it has a rating of 1.1A.To operate the product, it is necessary that 10 pins be inserted into the device.The total number of channels that can be accessed by users is 1.It can be powered by a battery with 5.2V.Applied input voltage of 6V does not damage the device.In the case of 4.5V output voltage, there is a possibility of optimal efficiency.The operation is carried out with an output current of 1.2A.The device falls under the Power Management Circuits subcategory.Using a supply voltage as low as 3.75V will allow it to function.Aligning it with Surface Mount is required for mounting.In order to ensure optimum supply voltage, the maximum voltage setting is set to 3mA.The power supply for this part is set to 3.8/5.5V.Voltage input can be as low as 7V volts at its maximum.Voltage 4.533V is the maximum output voltage needed for this operation.
MCP73833-AMI/UN Features
Battery pack voltage of 4.2V 1 channels Power Management Circuits subcategory 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package
MCP73833-AMI/UN Applications
There are a lot of Microchip Technology MCP73833-AMI/UN Battery Chargers ICs applications.