MCP73833-NVI/UN Overview

In the Tube package, you will find it.The package that is included with it comes in the shape of a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width).The mounting type of the device is Surface Mount.It is best to set the temperature to -40°C~85°C TA in order to prevent the system from overheating.The device cannot be charged without Constant - Programmable current flowing through it.If you use the base part number MCP73833, you can look for related parts.As far as the terminations are concerned, there are 10.In the case of the battery pack, it is 4.35V.Programmable features, such as Current, are available.With maximum charging current, its rating is 1.1A.In order to operate it, it has 10 pins.With a 6V supply voltage, it is capable of withstanding the operation of the device.It is possible to achieve high efficiency by using an output voltage of 4.5V.It is in this instance that the device's output current is set to 1.2A.This device is classified as Power Management Circuits under the subcategory.Using a supply voltage as low as 3.75V will allow it to function.Amounting is in line with Surface Mount.During the design process, Vsup (maximum supply voltage) was set to 3mA.There is 3.8/5.5V power supply set for the part.

MCP73833-NVI/UN Features

Battery pack voltage of 4.35V
Power Management Circuits subcategory
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package

MCP73833-NVI/UN Applications

There are a lot of Microchip Technology MCP73833-NVI/UN Battery Chargers ICs applications.

• Conventional charge
• GPS portable devices
• Shop charger
• Forklift
• Industrial
• Tablets
• Wearables
• Drone
• Electric lift car
• Portable devices