MCP73838-NVI/MF Overview

There is a package for Tube in which it can be found.We've included it in the 10-VFDFN Exposed Pad package so that it's easier to use.Mounting type for the device is Surface Mount.It is recommended that the temperature be set to -40°C~85°C TA in order to ensure reliable performance.In order to operate this device, an analog IC of POWER SUPPLY SUPPORT CIRCUIT must be used.The device requires Constant - Programmable current to charge.The related parts of the base part number MCP73838 can be found by following the order of the base part number.It contains a total of 10 terminations.It is equipped with 10 pins.As long as it is charged at maximum current, it will be rated as 1.1A.It requires pins 10 to function.The number of available channels is 1.It should be able to run off a battery of 5.35V.In order for the device to operate properly, the supply voltage should not exceed 6V.When the output voltage is 4.35V, high efficiency is possible.In this case, the output current of the device is set to 1.2A.As far as this device is concerned, it belongs to the subcategory Power Management Circuits.A supply voltage of 3.75V is suitable for it, because it can operate with a low supply voltage.Amounting is in line with Surface Mount.Vsup (maximum supply voltage) is set in the command to 3mA.The part's power supply is set to a value of 5V.Input voltage is limited to 6V volts.As a maximum output supply voltage for this operation, the voltage must be set to 4.5V.

MCP73838-NVI/MF Features

1 channels
Power Management Circuits subcategory
10-VFDFN Exposed Pad package

MCP73838-NVI/MF Applications

There are a lot of Microchip Technology
MCP73838-NVI/MF Battery Chargers ICs applications.

• Golf carts
• Forklift
• Pallet jacks
• Personnel carriers
• Maintenance shops
• Rental fleets
• Truck dealers
• Floor scrubber
• Material handling
• Man lift