MCP79400-I/ST Overview

real time clocks is located in package 8-TSSOP (0.173, 4.40mm Width).As of Tube, time clock is packaged in this way.There is 1.8V~5.5V voltage supply for this electrical RTC.It can be said that this electrical real time clock belongs to the Clock/Calendar type.The real time clock (RTC) that is mounted in the way of Surface Mount is connected to this circuit board.In order to operate properly, the temperature should be -40°C~85°C.During the course of operation, Alarm, Leap Year, Square Wave Output, SRAM, Unique ID can be ensured.There is the possibility of terminating transmission lines with 8 terminations, which means that the equipment used to terminate the line will match its characteristic impedance.In this case, the voltage supplied to the electronic component is 2.5V.A total of 8 pins are included in this product.MCP79400 are the family name of RTCs .As far as the supply voltage for this electrical digital time clock is concerned, it is 1.3V~5.5V.For the purpose of storing data and programs, the RTC times are embedded with a storage capacity of 64B.There should be no frequency greater than 0.4MHz in real time clocks' output.Mounting type Surface Mount matches the RTC module.For powering the real time clock, a power supply with a voltage of 2/5V is used.A total of 8 pins are attached to this real time clock.1 timer real time clocks send out a signal at a preset time based on input signals.Maintaining the supply voltage at 2.5, 3.3, 5 V is the key to high efficiency.RTC time is advisable to operate at a temperature above -40 °C.85 °C is the optimal operating temperature.With the minimal voltage of 1.8 V, real time clocks are capable of operating.This real time clock operates with a max supply voltage of 5.5 V.It is a real-time clock in the series --.A TIMER, REAL TIME CLOCK is the type of uPs, uCs, and peripheral ICs found in this electrical real time analog clock.

MCP79400-I/ST Features

8-TSSOP (0.173, 4.40mm Width) package
8 terminations
8 pin count
2/5V power supplies
Be maintained at 2.5, 3.3, 5 V for high efficiency.
-- series

MCP79400-I/ST Applications

There are a lot of Microchip Technology
MCP79400-I/ST Real Time Clocks applications.

• Copy machines
• Mobile equipment
• Battery powered devices
• Printers and copiers
• Electronic metering
• Digital cameras
• White goods
• Elapsed time counter
• Network powered devices
• Battery backed up systems