MCP79400T-I/ST Overview

There is an embedded version in the package 8-TSSOP (0.173, 4.40mm Width).Packaged as Tape & Reel (TR).This electrical RTC is powered by 1.8V~5.5V voltage.This electrical real time clock is of type Clock/Calendar.Surface Mount is the way to mount this real time clock (RTC).A temperature of -40°C~85°C should be used for operation.During operation, Alarm, Leap Year, Square Wave Output, SRAM, Unique ID can be guaranteed.The 8 termination is the practice of terminating a transmission line with a RTC module matched to its characteristic impedance.It is possible to see 2.5V voltage being supplied to this RTC real time clock.8 pins are attached to it.RTCs are a member of the family MCP79400.Its supply voltage is 1.3V~5.5V.In these RTC times, there is a memory of 64B where data and programs can be stored.There should be no more than 0.4MHz frequency in real time clocks' output.This RTC module has a mounting type of Surface Mount.A power supply of 2/5V is used to power it.8 pins are present on it.In this system, there are 1 timers, which are real time clocks that output a signal at a preset time after an input signal is received.RTC time is important to maintain the supply voltage at 2.5, 3.3, 5 V in order to maintain high efficiency.RTC time is recommended that the operating temperature be above -40 °C.Lower than 85 °C should be the operating temperature.There is minimum supply voltage of 1.8 V required for real time clocks to operate.In this case, 5.5 V is the maximum supply voltage.Real-time clocks belonging to the -- series are this type.In this electrical real time analog clock, there is a uPs/uCs/Peripheral ICs type of TIMER, REAL TIME CLOCK.

MCP79400T-I/ST Features

8-TSSOP (0.173, 4.40mm Width) package
8 terminations
8 pin count
2/5V power supplies
Be maintained at 2.5, 3.3, 5 V for high efficiency.
-- series

MCP79400T-I/ST Applications

There are a lot of Microchip Technology
MCP79400T-I/ST Real Time Clocks applications.

• Automotive
• Industrial
• Digital still camera
• Digital video camera
• Printers
• Copy machines
• Mobile equipment
• Battery powered devices
• Printers and copiers
• Electronic metering