MIC1557YM5-TR Overview

There is a SC-74A, SOT-753 enclosure with the programmable timer. A frequency of 5MHz is set for the programmable timer.It is used to pack in Tape & Reel (TR) case. It is recommended to mount in type Surface Mount.There is a voltage of 2.7V~18V that can be supplied by the programmable timer.The type of chips can be divided into 555 Type, Timer/Oscillator (Single). The operating temperature of this timer clock is -40°C~85°C. To mount this digital timer with Surface Mount. To keep the clock timer's supply current at 350μA. The operating supply voltage is rated at 350μA voltage. The IttyBitty? relates to the digital timer's series. The minimum operating temperature of the chip must not be lower than -40°C. It's best to use the timer clock when the temperature is below 85°C. It is based on MIC1557. The timer clock contains 5 pins. The digital timer has a frequency tolerance value of 2%. The minimum supply voltage of the chip must not be lower than 2.7V. The supply voltage of this chip should not exceed 18V. The number of Timers/Counters on the device is 1.

MIC1557YM5-TR Features

Operate frequency at 5MHz
Package / Case: Tape & Reel (TR)
Mounting Type:Surface Mount
Current - Supply：350μA
Max Operating temperature at -40°C
1 Timers/Counters

MIC1557YM5-TR Applications

There are a lot of Microchip Technology MIC1557YM5-TR Programmable Timers & Oscillators applications.

• Building Automation
• Intruder Detection
• Remote current sensor
• Home Automation Sensors
• Sensor Node
• Consumer Electronics
• Periodic “Wake-Up” Call
• Domestic appliances
• Low-Power Wireless
• Car Door Handle circuit