MIC2085-JYQS Overview

This is included in the 16-SSOP (0.154, 3.90mm Width) package.At present, 1 channels are available.It's packaged in a Tube shape.Device position DUAL is its terminal position.According to Surface Mount, it has been set up.Electric components of this type are classified as Hot Swap Controller.For reliable operation, set the temperature to -40°C~85°C.Application InfiniBand™ is available on the device.As you can see in Auto Retry, OVP, it's featured.The device should be able to be powered by a 2.3V~16.5VV power source.There are numbers in the MIC2085 family that include it.16 pins are used in operation.As far as PMIC - Power Management ICs is concerned, this gadget is self-contained.There are Current Limit, Fault Timeout, Slew Rate features that can be programmed.In the present, there is a shortage of 1.6mA.Positioned in direction of Surface Mount, it is at a right angle.Operating at 85°C°C ensures stable performance.The system must function at a minimum temperature of -40°C degrees Celsius in order to maintain its reliability.Hot-swappable device is important that the supply voltage (Vsup) is kept above 2.3 V for normal operation of the device.16.5 V (maximum supply voltage) is set.As for the IC, this gadget uses POWER SUPPLY SUPPORT CIRCUIT.Hot Swap can operate at a maximum supply current of 2.5 mA.An output voltage of 16.5VV is its maximum.The device produces -V as its maximum output.Hot Swap works wHot Swaph as low a voltage as possible, such as 2.3VV.There is a supply current of 1.6mA.Hot Swap requires 2.5mA volts of current to operate.By using this device, it is also possible to produce SEATED HT-CALCULATED.There is a MIC2085 series component on this electrical component.

MIC2085-JYQS Features

Features of Auto Retry, OVP
Programmable features of Current Limit, Fault Timeout, Slew Rate
MIC2085 series

MIC2085-JYQS Applications

There are a lot of Microchip Technology
MIC2085-JYQS hot swap controllers applications.

• Avionics systems
• Safe board insertion and extraction
• Industrial computers and servers
• Redundant-array-of-independent-disk (RAID) storage
• Other forms of communications infrastructure
• Board or blade insertion into live backplanes
• Backplane
• Loads
• Distributed power systems
• Redundant negative voltage supplies