MIC2130-4YTSE-TR Overview

As a result of 16-TSSOP (0.173, 4.40mm Width) Exposed Pad compact design, the switching controller is compatible with most applications. The dc motor controller is adquate to generate for 1 outputs. The pmic is packaged in Tape & Reel (TR) solid enclosure. Transistor Driver dc switching's outputs (s) can be handled by it. dc control's supply and operating voltages are 8V~40V. Suitable for a -40°C~125°C TJ dc switcher. This switching controller can switch at 400kHz. dc dc regulators can be carried out with Surface Mount. For efficient switching control, the dcdc regulator features Current Limit, Enable, Power Good, Soft Start. Search for "MIC2130" to find other relevant dc to dc converter ics. Total pins of switching converter are 16. It's important to remember that the dc dc regulator's normaloutput current is 15A, so you should note it down when starting a new project. A duty cycle set at 80 % ensures voltage regulator dc to dc reliability during power-on and power-off. The Surface Mount makes DC switcher suitable for most applications and prototypes. There is a maximum frequency of 440kHz on this dc regulators. The temperature should be at least -40°C. There should be 125°C temperature above 125°C degrees Celsius when dc regulator runs. There would be 16-eTSSOP supplier dc dc controller package for this part. Switches with 1 phases are used in this controller. In terms of maximum supply voltage, switching voltage regulators is rated 40V.

MIC2130-4YTSE-TR Features

Transistor Driver Outputs
Switching Frequency: 400kHz
Current Limit, Enable, Power Good, Soft Start
Max Duty Cycle: 80 %

MIC2130-4YTSE-TR Applications

There are a lot of Microchip Technology MIC2130-4YTSE-TR DC to DC converter applications.

• Experimental setup
• Mobile phones
• Correction machines
• Flaw detection equipment
• Computed tomography (CT)
• Digital display device
• Handheld GPS
• Hydro power
• Network technology
• Electrical power transmission