MIC2174-1YMM Overview

With a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller is suitable for a wide range of applications. For 1 outputs, the dc motor controller is appropriate. Packaging for the pmic consists of Tube solid enclosures. With Transistor Driver dc switching's output (s), it is able to handle it. 3V~40V is the operating voltage and supply voltage of the dc control. Worked in a -40°C~125°C TJ dc switcher before. This switching controller can switch at 300kHz. The Surface Mount allows it to be used for dc dc regulator in general. Featured in the dcdc regulator is Enable which allows efficient switching control. MIC2174 can be searched for other relevant dc to dc converter ics. 10 pins are on switching converter. Statistically, DC regulator outputs 5.5V volts. You should note down the dc dc regulator's usual output current of 25A when you start a project. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 87 %. DC switcher's Surface Mount qualifies it for most applications and prototypes. There is a maximum frequency of 375kHz for this dc regulators. A frequency of 300kHz is set for the switching controller. A temperature -40°C lower than -40°C should be maintained. Running the machine at 125°C is ideal. A dc to dc voltage regulator in the Hyper Speed Control? series, it belongs to this family. There would be 10-MSOP supplier dc dc controller package for this part. DC switcher will not be able to provide an output current above 25A volts. The supply current is 1.4mA. The phase of this controller is 1. In terms of maximum supply voltage, switching voltage regulators is rated 40V.

MIC2174-1YMM Features

Transistor Driver Outputs
Switching Frequency: 300kHz
Enable
Max Duty Cycle: 87 %
Frequency: 300kHz

MIC2174-1YMM Applications

There are a lot of Microchip Technology MIC2174-1YMM DC to DC converter applications.

• Solar power plants
• Ball screw pair
• Terrestrial set-top boxes
• Shearing machines
• Drilling machines
• Refrigerators of central air conditioners
• Large fire protection systems
• Experimental setup
• Energy management systems
• Special machining machine tools