MIC2182-3.3YM Overview

As a result of 16-SOIC (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. 1 outputs are supported by the dc motor controller. An enclosure of Tube is used to package the PMIC. The system can process Transistor Driver dc switching's outputs (s). 4.5V~32V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. The switching controller is capable of switching at the 300kHz position. dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Enable, Soft Start. A search for "MIC2182" will reveal other relevant dc to dc converter ics. 16 pins are present on switching converter. Statistically, the DC regulator outputs 3.3V voltage. It's important to remember that the dc dc regulator's normaloutput current is 20mA, so you should note it down when starting a new project. The maximum duty cycle of this voltage regulator dc to dc is set to 86 % to ensure reliability during power-up and power-down. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. DC regulators have a maximum frequency of 330kHz. A temperature -40°C lower than -40°C should be maintained. A temperature of 85°C more than 85°C degrees Celsius should be maintained in the undc regulator. Supplier dc dc controller package for this part is 16-SOIC. Input current cannot exceed 20A with this dc switcher. The supply current of the voltage controller is 2.5mA. With this controller, the phase is 1. Voltage is rated 32V for maximum supply.

MIC2182-3.3YM Features

Transistor Driver Outputs
Switching Frequency: 300kHz
Enable, Soft Start
Max Duty Cycle: 86 %

MIC2182-3.3YM Applications

There are a lot of Microchip Technology
MIC2182-3.3YM DC to DC converter applications.

• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment
• Injection molding machinery