MIC2184YM Overview

It comes in a 16-SOIC (0.154, 3.90mm Width) package, so switching controller can be used for most applications. It is sufficient to generate 1 outputs with this dc motor controller. A solid enclosure of Tube surrounds pmic. The program can handle Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 2.9V~14V. Worked in an dc switcher with a -40°C~85°C TA rating. Switching can be done at 400kHz with this switching controller. Surface Mount makes it suitable for general dc dc regulator. Featured in the dcdc regulator is Enable, Frequency Control, Soft Start which allows efficient switching control. In addition to "MIC2184", there are other relevant dc to dc converter ics you can find. There are 16 pins on switching converter. According to the test statistics, DC regulator outputs 12V voltage. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 100 %. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. There is 400kHz frequency setting on the switching controller. A temperature -40°C lower than -40°C should be maintained. There should be 85°C temperature above 85°C degrees Celsius when dc regulator runs. Its supplier dc dc controller package would be 16-SOIC. It runs on a 1mA supply current. During switching, this controller has a phase of 1. Voltage maximum is rated 14V.

MIC2184YM Features

Transistor Driver Outputs
Switching Frequency: 400kHz
Enable, Frequency Control, Soft Start
Max Duty Cycle: 100 %
Frequency: 400kHz

MIC2184YM Applications

There are a lot of Microchip Technology MIC2184YM DC to DC converter applications.

• Nuclear power plants
• Scientific research
• Servo drive system
• Pipe bending machines
• SMT equipment
• Remotely powered electric motors
• Industrial controllers
• Large fire protection systems
• Household control circuits
• Surface processing equipment