MIC2583R-MYQS Overview

In the 16-SSOP (0.154, 3.90mm Width) package you will find it.Channel 1 is currently available.A Tube-shaped package holds it.Device DUAL is located at the terminal position.The device consists of a total of 16 pins.As Surface Mount would say, it's set up like that.The electrical component in question falls into the classification Hot Swap Controller.A reliable operation requires the temperature to be set to -40°C~85°C.Apps for General Purpose are available on the device.A feature of Auto Retry describes it.Using a 2.3V~13.2VV power source should be able to power the device.The MIC2583 family includes it.During operation, 16 pins are used.Despite its self-contained nature, PMIC - Power Management ICs is a very compact device.Hot-swappable device has Fault Timeout, Slew Rate, UVLO programmable features.Presently, there is a sufficient supply of 1.5mA.As you can see, it is positioned in the direction of Surface Mount.For stable operation, the maximum operating temperature should be 85°C°C.At a minimum working temperature of -40°C degrees Celsius, it maintains its reliability.Hot-swappable device is recommended to keep the supply voltage (Vsup) above 2.3 V so that the device can function normally.Vsup is set to 13.2 V, the maximum supply voltage.As you can see in this example, the gadget uses an analog IC called POWER SUPPLY MANAGEMENT CIRCUIT.Hot Swap is set by default to output 1.An input voltage of 13.2VV is the maximum it can handle.Device --V has a maximum output.Using a low supply voltage, such as 2.3VV, will be feasible.Hot Swap is 1.5mA which is the operative supply current.There is a maximum current requirement of 2.5mA for it to operate.With the help of this device, UNDERVOLTAGE LOCKOUT PROTECTION, POWER ON RESET can also be produced.There is an electrical component in this series called --.

MIC2583R-MYQS Features

The terminal position of 16
Features of Auto Retry
Programmable features of Fault Timeout, Slew Rate, UVLO
-- series

MIC2583R-MYQS Applications

There are a lot of Microchip Technology
MIC2583R-MYQS hot swap controllers applications.

• Safe board insertion and extraction
• Industrial computers and servers
• Redundant-array-of-independent-disk (RAID) storage
• Other forms of communications infrastructure
• Board or blade insertion into live backplanes
• Backplane
• Loads
• Distributed power systems
• Redundant negative voltage supplies
• Central office switching systems