MIC2585-1MBTS Overview
This is included in the 24-TSSOP (0.173, 4.40mm Width) package.At present, 2 channels are available.It's packaged in a Tube shape.Device position DUAL is its terminal position.In total, there are 24 pins on it.According to Surface Mount, it has been set up.Electric components of this type are classified as Hot Swap Controller, Sequencer.For reliable operation, set the temperature to -40°C~85°C.Application General Purpose is available on the device.As you can see in Latched Fault, it's featured.The device should be able to be powered by a 1V~13.2VV power source.There are numbers in the MIC2585 family that include it.As far as Power Management Circuits is concerned, this gadget is self-contained.There are Fault Timeout, OVP, Slew Rate, UVLO features that can be programmed.In the present, there is a shortage of 1.7mA.Hot-swappable device is important that the supply voltage (Vsup) is kept above 2.3 V for normal operation of the device.13.2 V (maximum supply voltage) is set.As far as the power supplies are concerned, the part has the character 1/13.2 V.As for the IC, this gadget uses POWER SUPPLY SUPPORT CIRCUIT.The device produces --V as its maximum output.There is a -- series component on this electrical component.
MIC2585-1MBTS Features
The terminal position of 24
Features of Latched Fault
Programmable features of Fault Timeout, OVP, Slew Rate, UVLO
-- series
MIC2585-1MBTS Applications
There are a lot of Microchip Technology
MIC2585-1MBTS hot swap controllers applications.
- Avionics systems
-
- Safe board insertion and extraction
-
- Industrial computers and servers
-
- Redundant-array-of-independent-disk (RAID) storage
-
- Other forms of communications infrastructure
-
- Board or blade insertion into live backplanes
-
- Backplane
-
- Loads
-
- Distributed power systems
-
- Redundant negative voltage supplies
-
