MIC2585-2LBTS Overview
The 24-TSSOP (0.173, 4.40mm Width) package contains it.Hot-swappable device is currently possible to access 2 channels.There is a Tube-shaped package for it.This device has a terminal position of DUAL.24 pins make up its total.Surface Mount sets it up.This electrical component belongs to the Hot Swap Controller, Sequencer classification.Hot-swappable device is recommended that the temperature is set to -40°C~85°C in order to ensure reliable performance.Devices with General Purpose applications are available.In Latched Fault, it is featured.As long as you have a 1V~13.2VV power source, it should work.MIC2585 numbers belong to this family.The gadget in Power Management Circuits is self-contained.Fault Timeout, OVP, Slew Rate, UVLO is the number of features it can be programmed with.Currently, 1.7mA is in short supply.In order for a device to operate normally, the supply voltage (Vsup) must be higher than 2.3 V.There is a value of 13.2 V set for Vsup (maximum supply voltage).Hot-swappable device has a 1/13.2 V power supply, which is the power supply used in the part.There is a POWER SUPPLY SUPPORT CIRCUIT IC in this gadget, which is an analog IC.In terms of output, the device has a maximum of --V.There are several electrical components in the -- series, including this one.
MIC2585-2LBTS Features
The terminal position of 24
Features of Latched Fault
Programmable features of Fault Timeout, OVP, Slew Rate, UVLO
-- series
MIC2585-2LBTS Applications
There are a lot of Microchip Technology
MIC2585-2LBTS hot swap controllers applications.
- Telecommunications
-
- Industrial
-
- Datacom
-
- Electric vehicle
-
- Avionics systems
-
- Safe board insertion and extraction
-
- Industrial computers and servers
-
- Redundant-array-of-independent-disk (RAID) storage
-
- Other forms of communications infrastructure
-
- Board or blade insertion into live backplanes
-
