MIC2585-2LBTS-TR Overview

There is a 24-TSSOP (0.173, 4.40mm Width) package that includes this.At the moment, there are 2 channels available.The package resembles a Tape & Reel (TR).There is a DUAL terminal position on the device.A total of 24 pins are present on it.This is set up in the same way as Surface Mount.Hot-swappable device is classified as a Hot Swap Controller, Sequencer electrical component.A temperature setting of -40°C~85°C will ensure reliable operation.General Purpose applications can be downloaded from the device.The article is featured in Latched Fault.Hot-swappable device should be able to work wHot-swappable deviceh a 1V~13.2VV power source.Numbers in the MIC2585 family include it.Among its programmable features are Fault Timeout, OVP, Slew Rate, UVLO.There is currently an adequate supply of 1.7mA.For normal operation, Vsup should be maintained above 2.3 V.In the Vsup (maximum supply voltage) setting, 13.2 V is selected.Analog IC POWER SUPPLY SUPPORT CIRCUIT is used in this gadget.There is a maximum output of --V from the device.A -- series electrical component is used in this application.

MIC2585-2LBTS-TR Features

The terminal position of 24
Features of Latched Fault
Programmable features of Fault Timeout, OVP, Slew Rate, UVLO
-- series

MIC2585-2LBTS-TR Applications

There are a lot of Microchip Technology
MIC2585-2LBTS-TR hot swap controllers applications.

• Datacom
• Electric vehicle
• Avionics systems
• Safe board insertion and extraction
• Industrial computers and servers
• Redundant-array-of-independent-disk (RAID) storage
• Other forms of communications infrastructure
• Board or blade insertion into live backplanes
• Backplane
• Loads