MIC2585-2MBTS-TR Overview
Package 24-TSSOP (0.173, 4.40mm Width) includes it.As of now, 2 channels are available.Tape & Reel (TR)-shaped packaging is used for this product.A device's terminal position is DUAL.24 pins make up the entire device.There is a Surface Mount-like arrangement.In the electrical industry, this component is categoriHot Swap Controller, Sequencered as Hot Swap Controller, Sequencer.For reliable performance, the temperature should be set to -40°C~85°C.There are General Purpose applications available for the device.An article about it appears in Latched Fault.In the case of a 1V~13.2VV power source, it should work just fine.In the MIC2585 family, it appears as a number.Programmable features include Fault Timeout, OVP, Slew Rate, UVLO.Hot-swappable device is estimated that there is a current supply of 1.7mA.For normal operation, the supply voltage (Vsup) should be kept above 2.3 V in order to maintain a constant level of power.Set Vsup to 13.2 V for maximum supply voltage.Hot Swap uses an analog IC, in this case a POWER SUPPLY SUPPORT CIRCUIT.As far as output is concerned, the device can produce --V.The -- series is represented by this electrical component.
MIC2585-2MBTS-TR Features
The terminal position of 24
Features of Latched Fault
Programmable features of Fault Timeout, OVP, Slew Rate, UVLO
-- series
MIC2585-2MBTS-TR Applications
There are a lot of Microchip Technology
MIC2585-2MBTS-TR hot swap controllers applications.
- Industrial computers and servers
-
- Redundant-array-of-independent-disk (RAID) storage
-
- Other forms of communications infrastructure
-
- Board or blade insertion into live backplanes
-
- Backplane
-
- Loads
-
- Distributed power systems
-
- Redundant negative voltage supplies
-
- Central office switching systems
-
- Power supply hotswap & inrush control
-
