MIC2586R-2BM Overview

In the 14-SOIC (0.154, 3.90mm Width) package you will find it.Channel 1 is currently available.A Tube-shaped package holds it.Device DUAL is located at the terminal position.The device consists of a total of 14 pins.As Surface Mount would say, it's set up like that.The electrical component in question falls into the classification Hot Swap Controller, Sequencer.A reliable operation requires the temperature to be set to -40°C~85°C.Apps for General Purpose are available on the device.A feature of Auto Retry describes it.Using a 10V~80VV power source should be able to power the device.The MIC2586 family includes it.Despite its self-contained nature, Power Management Circuits is a very compact device.Hot-swappable device has Current Limit, Fault Timeout, Slew Rate, UVLO programmable features.Presently, there is a sufficient supply of 2mA.Hot-swappable device is recommended to keep the supply voltage (Vsup) above 10 V so that the device can function normally.Vsup is set to 80 V, the maximum supply voltage.Part 10/80 V is associated with power supplies.As you can see in this example, the gadget uses an analog IC called POWER SUPPLY SUPPORT CIRCUIT.The maximum supply current it requires to operate is 5 mA.Device --V has a maximum output.With the help of this device, ALSO OPERATES WITH A NOMINAL +48V can also be produced.There is an electrical component in this series called --.

MIC2586R-2BM Features

The terminal position of 14
Features of Auto Retry
Programmable features of Current Limit, Fault Timeout, Slew Rate, UVLO
-- series

MIC2586R-2BM Applications

There are a lot of Microchip Technology
MIC2586R-2BM hot swap controllers applications.

• Safe board insertion and extraction
• Industrial computers and servers
• Redundant-array-of-independent-disk (RAID) storage
• Other forms of communications infrastructure
• Board or blade insertion into live backplanes
• Backplane
• Loads
• Distributed power systems
• Redundant negative voltage supplies
• Central office switching systems