MIC2587-1BM Overview
Package 8-SOIC (0.154, 3.90mm Width) includes it.As of now, 1 channels are available.Tube-shaped packaging is used for this product.A device's terminal position is DUAL.8 pins make up the entire device.There is a Surface Mount-like arrangement.In the electrical industry, this component is categoriHot Swap Controllered as Hot Swap Controller.For reliable performance, the temperature should be set to -40°C~85°C.There are General Purpose applications available for the device.An article about it appears in Latched Fault.In the case of a 10V~80VV power source, it should work just fine.In the MIC2587 family, it appears as a number.Despite its self-contained nature, Power Management Circuits is a very compact device.Programmable features include Current Limit, Fault Timeout, Slew Rate, UVLO.Hot-swappable device is estimated that there is a current supply of 2mA.For normal operation, the supply voltage (Vsup) should be kept above 10 V in order to maintain a constant level of power.Set Vsup to 80 V for maximum supply voltage.In terms of power supplies, it is the character 10/80 V that appears on the part.Hot Swap uses an analog IC, in this case a POWER SUPPLY SUPPORT CIRCUIT.A maximum supply current of 5 mA is required for the device to operate.As far as output is concerned, the device can produce --V.The -- series is represented by this electrical component.
MIC2587-1BM Features
The terminal position of 8
Features of Latched Fault
Programmable features of Current Limit, Fault Timeout, Slew Rate, UVLO
-- series
MIC2587-1BM Applications
There are a lot of Microchip Technology
MIC2587-1BM hot swap controllers applications.
- Industrial computers and servers
-
- Redundant-array-of-independent-disk (RAID) storage
-
- Other forms of communications infrastructure
-
- Board or blade insertion into live backplanes
-
- Backplane
-
- Loads
-
- Distributed power systems
-
- Redundant negative voltage supplies
-
- Central office switching systems
-
- Power supply hotswap & inrush control
-
