MIC2596-2BTS TR Overview

In the 20-TSSOP (0.173, 4.40mm Width) package you will find it.Channel 2 is currently available.A Tape & Reel (TR)-shaped package holds it.Device DUAL is located at the terminal position.The device consists of a total of 20 pins.As Surface Mount would say, it's set up like that.The electrical component in question falls into the classification Hot Swap Controller.A reliable operation requires the temperature to be set to -40°C~85°C.Apps for -48V are available on the device.A feature of Auto Retry, Thermal Limit, UVLO describes it.Using a -70V~-15VV power source should be able to power the device.The MIC2596 family includes it.Hot-swappable device has Circuit Breaker, Fault Timeout programmable features.Presently, there is a sufficient supply of 3.3mA.Hot-swappable device is recommended to keep the supply voltage (Vsup) above 15 V so that the device can function normally.Vsup is set to 70 V, the maximum supply voltage.As you can see in this example, the gadget uses an analog IC called POWER SUPPLY SUPPORT CIRCUIT.Device --V has a maximum output.With the help of this device, OVERCURRENT FAULT SENSING AND PROTECTION can also be produced.There is an electrical component in this series called --.

MIC2596-2BTS TR Features

The terminal position of 20
Features of Auto Retry, Thermal Limit, UVLO
Programmable features of Circuit Breaker, Fault Timeout
-- series

MIC2596-2BTS TR Applications

There are a lot of Microchip Technology
MIC2596-2BTS TR hot swap controllers applications.

• Safe board insertion and extraction
• Industrial computers and servers
• Redundant-array-of-independent-disk (RAID) storage
• Other forms of communications infrastructure
• Board or blade insertion into live backplanes
• Backplane
• Loads
• Distributed power systems
• Redundant negative voltage supplies
• Central office switching systems