MIC2597-1BTS Overview
You can find it in the 20-TSSOP (0.173, 4.40mm Width) package.At the moment, 2 channels are accessible.In the form of a Tube, it is packaged.In this case, the device is located at terminal DUAL.The device has a total of 20 pins.Surface Mount has set it up this way.An electrical component classified as Hot Swap Controller belongs to this category.Ensure reliable operation by setting the temperature to -40°C~85°C.A -48V application is available for the device.There is a mention of it in Latched Fault, Thermal Limit, UVLO.In theory, it should work as long as the power source has a -70V~-15VV input.This number is a member of the MIC2597 family.A gadget like this is self-contained in Power Management Circuits.The programmable features of this device are Circuit Breaker, Fault Timeout.Presently, there is a limited supply of 3.3mA.Normally, Vsup should remain above 15 V.The maximum supply voltage is set to 70 V.Hot-swappable device is important to note that the part has a power supply 40 V.As the name suggests, this gadget uses an analog IC, which in this case is POWER SUPPLY SUPPORT CIRCUIT.The maximum operating current is 5 mA.Its maximum output is --V.Using this device, you can also produce OVERCURRENT FAULT SENSING AND PROTECTION.-- series components make up this electrical component.
MIC2597-1BTS Features
The terminal position of 20
Features of Latched Fault, Thermal Limit, UVLO
Programmable features of Circuit Breaker, Fault Timeout
-- series
MIC2597-1BTS Applications
There are a lot of Microchip Technology
MIC2597-1BTS hot swap controllers applications.
- Industrial
-
- Datacom
-
- Electric vehicle
-
- Avionics systems
-
- Safe board insertion and extraction
-
- Industrial computers and servers
-
- Redundant-array-of-independent-disk (RAID) storage
-
- Other forms of communications infrastructure
-
- Board or blade insertion into live backplanes
-
- Backplane
-
