MIC2871YMK-TR Overview

On the board, there is also a 14-WFDFN Exposed Pad package that saves space.As part of the design of this LED driver, there are 1 outputs that have been used.The mounting method adopted is Surface Mount.In this case, the result is a DC DC Regulator with high efficiency.It is possible for the led driver ic to function normally at -40°C~125°C TJ.There are considerable benefits for Camera Flash.A frequency of 2MHz is used to operate it.With a base of 16, this LED light driver is configured.If the voltage supply is less than 2.7V, undetermined failures will occur.There is a mounting of it by Surface Mount.LED drivers have a base part number of MIC2871.It is acceptable to supply voltages of 5.5V volts.It supports a maximum value of 5.5V.Its high efficiency is based on the fact that the maximal supply current should not exceed 230μA.An operating temperature above 125°C should ensure stable operation.1.2A is the maximum current the load can handle.Maintaining a temperature above -40°C is essential for stabilizing operation.

MIC2871YMK-TR Features

Available in the 14-WFDFN Exposed Pad package
Operating temperature of -40°C~125°C TJ
Frequency of 2MHz

MIC2871YMK-TR Applications

There are a lot of Microchip Technology MIC2871YMK-TR LED Driver ICs applications.

• General lighting
• LED Lighting PFCs, Linear Dimmable
• Amusement Machines
• Down lighting
• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
• Down lights
• A- lamps
• Street lighting
• Dimmable LED for vehicle interiors
• Refrigeration lighting