In a Tube case, the IC voltage regulator is delivered. A TO-263-6, D2Pak (5 Leads + Tab), TO-263BA case contains the Liner IC. This PMIC chip has an output type of Adjustable. In this electrical part, there are 1 regulators that are implemented. Voltage Regulated IC Surface Mount varies its operating temperature range. The IC Voltage Regulator's operating temperature is -40°C~125°C degrees. Currently, this regulator IC has an output function configured as Positive as its output function. The current output of this IC regulator is 3A. There are 5 +Tab pins in total on this board. Featuring 1 outputs in total, this voltage regulator IC enables prompt, sufficient performance regardless of the application. There is a 10 volt dropout voltage on this transistor. A 5-pin is present on the chip. It is MIC29302A for this voltage regulator IC, just for your information. I would describe this component as a typical PMIC - Power Management ICs component. In this case, the regulator type is Low Dropout Voltage, which corresponds to this voltage regulator IC. In fact, it is voltage regulator IC of the -- Series of cameras. When the temperature is below 125°C, you are advised to use the voltage regulator IC. The chip's operating temperature cannot be lowered below -40°C. Tolerance for this regulator IC is 1 %, which is very low.
MIC29302AWU Features
450mV dropout voltage PMIC - Power Management ICs subtageroy The maximum operating temperature of -40°C 1 % tolerance
MIC29302AWU Applications
There are a lot of Microchip Technology MIC29302AWU Linear Voltage Regulators applications.