MIC2981/82YN

join

new-10%

Manufacturer part number:MIC2981/82YN

Manufacturer:Microchip Technology

Description:Bipolar 2.54mm PMIC MIC2981/82 18 Pin 35V 18-DIP (0.300, 7.62mm)

Case Package:SOT-23

Datasheet:MIC2981/82YN Datasheet

RoHs Status:non-compliant

Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	18-DIP (0.300, 7.62mm)
Number of Pins	18
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2005
JESD-609 Code	e3
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	18
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn) - annealed
Additional Feature	LG-MAX
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Number of Functions	8
Supply Voltage	35V
Terminal Pitch	2.54mm
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	MIC2981/82
Output Voltage	50V
Output Type	Bipolar
Max Output Current	500mA
Supply Voltage-Min (Vsup)	5V
Interface	On/Off
Number of Circuits	1
Nominal Supply Current	10mA
Output Configuration	High Side
Output Current	500mA
Voltage - Supply (Vcc/Vdd)	Not Required
Input Type	Non-Inverting
Switch Type	General Purpose
Ratio - Input:Output	1:1
Voltage - Load	5V~50V
Turn On Time	2 μs
Number of Output Lines	8
Output Peak Current Limit-Nom	0.35A
Built-in Protections	TRANSIENT
Length	23.37mm
Width	7.62mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

Quantity	Unit Price	Ext. Price
1	$2.07000	$2.07
25	$1.72000	$43
100	$1.56560	$156.56

MIC2981/82YN Overview

As a result, it is packaged in the form of a Tube.There is a package for it in the 18-DIP (0.300, 7.62mm) package.This LED driving board is mounted using the mounting type Through Hole.The switch type of this switch is General Purpose.Keeping the temperature at -40°C~85°C TA ensures reliable operation.The LED driving board operates with a supply voltage of Not Required.It produces a maximum output voltage of Bipolar volts at its maximum output.It comes under the family of MIC2981/82.The termination count is 18.The 18 pins are used to operate the LED driver.Currently, there are 8 functions associated with the lighting driver.Maximum output current falls to 500mA when operation criteria are met.It is possible to obtain high efficiency with a supply voltage of 35V.This lighting driver is mounted in the way of Through Hole.The output current is set to 500mA in this case.For normal operation, the supply voltage (Vsup) should be kept above 5V.With the help of this lighting driver, LG-MAX can also be produced.