MIC3839YMM Overview

Capsuled in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller can be used for a wide range of applications. The dc motor controller is adquate to generate for 1 outputs. Tube is the solid enclosure in which PMIC is packaged. The program can handle Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 2V~14V. Worked in an dc switcher with a -40°C~85°C TA rating. There is a switch at 200kHz that can be used with this controller. The Surface Mount value makes it suitable for general dc dc regulator. DCDC regulator is controlled efficiently by Current Limit, Frequency Control, Ramp. You can find other relevant dc to dc converter ics by searching "MIC3839". There are only 10 pins on switching converter. In most cases, the dc dc regulator's output current is 1kA. This information should be noted when you begin working with the component. The duty cycle of the voltage regulator dc to dc can be set to 49 % on power-up or power-down to ensure reliability. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. Users should apply 14V to operate the voltage regulator dc to dc safely and reliably. You should keep dc regulator at -40°C degrees or higher. The temperature should not exceed 85°C degrees Celsius. Supplier dc dc controller package for this part is 10-MSOP. This controller contains 1 phases. A maximum supply voltage of 15V is specified. Components may become damaged if their current exceeds 20mA.

MIC3839YMM Features

Transistor Driver Outputs
Switching Frequency: 200kHz
Current Limit, Frequency Control, Ramp
Max Duty Cycle: 49 %

MIC3839YMM Applications

There are a lot of Microchip Technology MIC3839YMM DC to DC converter applications.

• Planers
• Computer rooms
• Industrial robots
• Balance equipment
• Geothermal power
• Series voltage regulation circuits
• Medical monitoring systems
• Smoke prevention equipment
• Large fire protection systems
• Lathes