MIC38C43YN Overview

It comes in the 8-DIP (0.300, 7.62mm) package, which makes switching controller suitable for most applications. It is sufficient to generate 1 outputs with this dc motor controller. Packaging for the pmic consists of Tube solid enclosures. The program can handle Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 7.6V~20V. Qualified to work in an dc switcher with -40°C~85°C TA. The switching controller can be switched at 500kHz. dc dc regulators can be carried out with Through Hole. Frequency Control provides dcdc regulator efficient switching control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. There are a DUAL terminal on the switching converters. Different dc switching's functions can be applied to 8 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's voltage input of 15V. MIC38C43 can be searched for other relevant dc to dc converter ics. In total, switching converter has 8 pins. Statistically, DC regulator outputs 5V volts. This dc to dc regulator accepts only 30V input voltage at most. In most cases, the output current of the dc dc regulator will be 500A, so note that when you start the project. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 96 %. DC switcher's Through Hole qualifies it for most applications and prototypes. With a current supply of 4mA, it runs. Components may be damaged if their current is greater than 6mA.

MIC38C43YN Features

Transistor Driver Outputs
Switching Frequency: 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 96 %

MIC38C43YN Applications

There are a lot of Microchip Technology
MIC38C43YN DC to DC converter applications.

• Linear guide
• Ball screw pair
• Computer application technology
• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment