MIC38C45AYM Overview

With a 8-SOIC (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. For 1 outputs, the dc motor controller is appropriate. A solid enclosure of Tube surrounds pmic. Transistor Driver dc switching's outputs (s) can be handled by it. This dc control has a supply voltage and operating voltage of 7.6V~20V. Worked in an dc switcher with a -40°C~85°C TA rating. Switching can be done at 500kHz with this switching controller. The Surface Mount value makes it suitable for general dc dc regulator. For efficient switching control, the dcdc regulator features Frequency Control. Search for "MIC38C45" to find other relevant dc to dc converter ics. There are a total of 8 pins on switching converter. The test statistics indicate that DC regulator outputs a voltage of 5V. You should note that the dc dc regulator's usual output current is 500mA. It is set to 50 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. To run the voltage regulator dc to dc safely and reliably, users should apply 8.4V to the voltage regulator dc to dc. Ideally, dc regulator should be kept at a temperature of -40°C or higher. The temperature should not exceed 85°C degrees Celsius. The supplier dc dc controller package for this part would be 8-SOIC. The supply current is 4mA. There are 1 phases in this controller. In terms of maximum supply voltage, switching voltage regulators is rated 20V.

MIC38C45AYM Features

Transistor Driver Outputs
Switching Frequency: 500kHz
Frequency Control
Max Duty Cycle: 50 %

MIC38C45AYM Applications

There are a lot of Microchip Technology
MIC38C45AYM DC to DC converter applications.

• Servo drive system
• Digital display device
• Linear guide
• Ball screw pair
• Computer application technology
• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors