MIC4427ZN Overview

The 8-DIP (0.300, 7.62mm) package offers greater flexibility.The packaging method is indicated by Tube.Gate drivers is configured wGate driversh 2 drivers.Ideally, it should be mounted in the direction of Through Hole.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 4.5V~18V.A gate type of N-Channel, P-Channel MOSFET has been used in its design.In this device, temperatures must not exceed 0°C~150°C TJ.Mosfet driver uses Non-Inverting as Mosfet drivers input type.It's configured with 8 terminations.The base part number MIC4427 refers to a number of related parts.In this case, Through Hole indicates how the device is to be mounted.At the time of design, it is configured with 8 pins.BUFFER OR INVERTER BASED MOSFET DRIVER is employed as its interface IC.As a maximum, there is 1.5A limit to the output current.The output current supported by the device is 1.5A.Mosfet gate drivers outputs 25mV as voltage.

MIC4427ZN Features

Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins

MIC4427ZN Applications

There are a lot of Microchip Technology MIC4427ZN gate drivers applications.

• Industrial Modules
• Isolated switch mode power supplies (SMPS)
• Motor Control
• High current laser/LED systems
• 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
• Motor Controls
• Dual-Battery Systems
• Commercial air-conditioning (CAC)
• Isolated Gate Driver Supplies
• Industrial Motor Inverter - Power Tools, Robotics