MIC5206-3.3YMM Overview

Tube cases are used for delivery. The Liner regulator IC is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. Fixed is the output type of the Voltage Regulator IC. As part of this electrical component, 1 regulators are implemented. Variations are made to the Surface Mount operating temperature range by the Voltage Regulator IC. Default settings are set to -40°C~125°C degrees. There is a Positive configured as the output function for this IC regulator. There is a current output of 150mA from this regulator IC. There are 1 Output outputs total on this voltage regulator IC in order to ensure that prompt and sufficient performance is achieved. There is a dropout voltage of 10 volts on this IC regulator. Chips have 8 pins. For your information, the basic part number for this regulator IC is MIC5206. In this case, we have a typical PMIC - Power Management ICs component. There is one type of regulator for this device, which is FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR. This IC regulator is a part of the -- Series of devices. You should use the regulator IC when the temperature is below 125°C. It is not possible to operate the chip below -40°C operating temperature.

MIC5206-3.3YMM Features

165mV dropout voltage
PMIC - Power Management ICs subtageroy
The maximum operating temperature of -40°C

MIC5206-3.3YMM Applications

There are a lot of Microchip Technology
MIC5206-3.3YMM Linear Voltage Regulators applications.

• Battery-powered device
• Communication device
• Personal communication device
• Portable telephone
• Electronic notebook
• Camera
• Video equipment
• CPU power supply
• Switching regulator
• Multiple-power supply system