MIC5209-2.5YU-TR Overview

Tape & Reel (TR) cases are used for delivery. The Liner regulator IC is packaged in TO-263-6, D2Pak (5 Leads + Tab), TO-263BA case. Fixed is the output type of the Voltage Regulator IC. As part of this electrical component, 1 regulators are implemented. Variations are made to the Surface Mount operating temperature range by the Voltage Regulator IC. Default settings are set to -40°C~125°C degrees. There is a Positive configured as the output function for this IC regulator. There is a current output of 500mA from this regulator IC. There are a total of 4 pins on this board. There is a dropout voltage of 10 volts on this IC regulator. Chips have 6 pins. For your information, the basic part number for this regulator IC is MIC5209. In this case, we have a typical PMIC - Power Management ICs component. There is one type of regulator for this device, which is FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR. This IC regulator is a part of the -- Series of devices. You should use the regulator IC when the temperature is below 125°C. It is not possible to operate the chip below -40°C operating temperature.

MIC5209-2.5YU-TR Features

350mV dropout voltage
PMIC - Power Management ICs subtageroy
The maximum operating temperature of -40°C

MIC5209-2.5YU-TR Applications

There are a lot of Microchip Technology
MIC5209-2.5YU-TR Linear Voltage Regulators applications.

• Battery-powered device
• Communication device
• Personal communication device
• Portable telephone
• Electronic notebook
• Camera
• Video equipment
• CPU power supply
• Switching regulator
• Multiple-power supply system