In a Tube case, the IC voltage regulator is delivered. A TO-263-4, D2Pak (3 Leads + Tab), TO-263AA case contains the Liner IC. This PMIC chip has an output type of Fixed. In this electrical part, there are 1 regulators that are implemented. Voltage Regulated IC Surface Mount varies its operating temperature range. The IC Voltage Regulator's operating temperature is -40°C~125°C degrees. Currently, this regulator IC has an output function configured as Positive as its output function. The current output of this IC regulator is 500mA. The chip on which this is based has an overall count of 3 pins. Featuring 1 outputs in total, this voltage regulator IC enables prompt, sufficient performance regardless of the application. There is a 10 volt dropout voltage on this transistor. It is MIC5237 for this voltage regulator IC, just for your information. I would describe this component as a typical PMIC - Power Management ICs component. In this case, the regulator type is FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR, which corresponds to this voltage regulator IC. A maximum output current of 500mA is required to meet the operation requirements. It operates in the 8 mA Quiescent Current state. In fact, it is voltage regulator IC of the -- Series of cameras. When the temperature is below 125°C, you are advised to use the voltage regulator IC. The chip's operating temperature cannot be lowered below -40°C. The top supply voltage is 16 V volts. Tolerance for this regulator IC is 5 %, which is very low.
MIC5237-5.0YU Features
300mV dropout voltage PMIC - Power Management ICs subtageroy The maximum operating temperature of -40°C 5 % tolerance
MIC5237-5.0YU Applications
There are a lot of Microchip Technology MIC5237-5.0YU Linear Voltage Regulators applications.