In a Tape & Reel (TR) case, the IC voltage regulator is delivered. A 6-WFDFN Exposed Pad, 6-MLF® case contains the Liner IC. This PMIC chip has an output type of Adjustable. In this electrical part, there are 1 regulators that are implemented. Voltage Regulated IC Surface Mount varies its operating temperature range. The IC Voltage Regulator's operating temperature is -40°C~125°C degrees. Currently, this regulator IC has an output function configured as Positive as its output function. The current output of this IC regulator is 150mA. There are 6 pins in total on this board. Featuring 1 outputs in total, this voltage regulator IC enables prompt, sufficient performance regardless of the application. There is a 10 volt dropout voltage on this transistor. A 6-pin is present on the chip. It is MIC5301 for this voltage regulator IC, just for your information. I would describe this component as a typical PMIC - Power Management ICs component. In this case, the regulator type is ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR, which corresponds to this voltage regulator IC. A maximum output current of 150mA is required to meet the operation requirements. It operates in the 85 uA Quiescent Current state. In fact, it is voltage regulator IC of the -- Series of cameras. When the temperature is below 125°C, you are advised to use the voltage regulator IC. The chip's operating temperature cannot be lowered below -40°C. Tolerance for this regulator IC is 2 %, which is very low.
MIC5301YML-TR Features
40mV dropout voltage PMIC - Power Management ICs subtageroy The maximum operating temperature of -40°C 2 % tolerance
MIC5301YML-TR Applications
There are a lot of Microchip Technology MIC5301YML-TR Linear Voltage Regulators applications.