The package is delivered in a Tape & Reel (TR) case. In order to package the IC voltage regulator, a 4-UFDFN Exposed Pad, 4-TMLF® case is used. This IC Regulator has a type of output called Fixed. There are 1 regulators implemented in this electroic component. Surface Mount can be adjusted in the Linear IC in order to vary the temperature range over which Linear Regulator operates. The IC voltage regulator must be maintained at -40°C~125°C degrees for it to function. As you can see, this regulator's output function is configured to be Positive. At present, it can produce an output of up to 150mA. A total of 4 pins are located on this chip, making it the size of a standard chip. The regulator has a total of 1 outputs to make sure that it delivers prompt, sufficient outputs. A dropout voltage of 10 volts is what makes it a dropout voltage. Depending on the chip, 4 pins may be available. For your information, part number MIC5302 is the basic part number for this voltage regulator IC. As you can see, this regulator IC represents a typical PMIC - Power Management ICs component. As far as the regulator type, it is a FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR type. There is a maximum output current of 150mA for this regulator to meet the operational requirements. It operates in the 85 uA Quiescent Current state. The -- Series is a series of products made by D-Link. As a general rule, it is recommended that you use the IC voltage regulator when temperatures are below 125°C degrees Celsius. At the lowest operating temperature that can be reached by the chip, it is -40°C.
MIC5302-3.3YMT-TR Features
50mV dropout voltage PMIC - Power Management ICs subtageroy The maximum operating temperature of -40°C
MIC5302-3.3YMT-TR Applications
There are a lot of Microchip Technology MIC5302-3.3YMT-TR Linear Voltage Regulators applications.