MIC5371-PMYMT-TR Overview

In a Tape & Reel (TR) case, the IC voltage regulator is delivered. A 6-UFDFN Exposed Pad, 6-TMLF® case contains the Liner IC. This PMIC chip has an output type of Fixed. In this electrical part, there are 2 regulators that are implemented. Voltage Regulated IC Surface Mount varies its operating temperature range. The IC Voltage Regulator's operating temperature is -40°C~125°C degrees. Currently, this regulator IC has an output function configured as Positive as its output function. The current output of this IC regulator is 150mA, 150mA. There are 6 pins in total on this board. Featuring 2 outputs in total, this voltage regulator IC enables prompt, sufficient performance regardless of the application. There is a 10 volt dropout voltage on this transistor. A 6-pin is present on the chip. It is MIC5371 for this voltage regulator IC, just for your information. I would describe this component as a typical PMIC - Power Management ICs component. In this case, the regulator type is FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR, which corresponds to this voltage regulator IC. A maximum output current of 150mA is required to meet the operation requirements. In fact, it is voltage regulator IC of the -- Series of cameras. When the temperature is below 125°C, you are advised to use the voltage regulator IC. The chip's operating temperature cannot be lowered below -40°C.

MIC5371-PMYMT-TR Features

155mV dropout voltage
PMIC - Power Management ICs subtageroy
The maximum operating temperature of -40°C

MIC5371-PMYMT-TR Applications

There are a lot of Microchip Technology
MIC5371-PMYMT-TR Linear Voltage Regulators applications.

• Portable telephone
• Electronic notebook
• Camera
• Video equipment
• CPU power supply
• Switching regulator
• Multiple-power supply system
• Digital audio player
• Digital TV
• Smartcard