In a Tape & Reel (TR) case, the IC voltage regulator is delivered. A 10-VFDFN Exposed Pad, 10-MLF® case contains the Liner IC. This PMIC chip has an output type of Adjustable. In this electrical part, there are 1 regulators that are implemented. Voltage Regulated IC Surface Mount varies its operating temperature range. The IC Voltage Regulator's operating temperature is -40°C~85°C degrees. Currently, this regulator IC has an output function configured as Positive as its output function. The current output of this IC regulator is 1.5A. There are 10 pins in total on this board. Featuring 1 outputs in total, this voltage regulator IC enables prompt, sufficient performance regardless of the application. There is a 10 volt dropout voltage on this transistor. A 10-pin is present on the chip. It is MIC61150 for this voltage regulator IC, just for your information. I would describe this component as a typical PMIC - Power Management ICs component. In this case, the regulator type is ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR, which corresponds to this voltage regulator IC. A maximum output current of 1.5A is required to meet the operation requirements. In fact, it is voltage regulator IC of the -- Series of cameras. When the temperature is below 85°C, you are advised to use the voltage regulator IC. The chip's operating temperature cannot be lowered below -40°C.
MIC61150YML-TR Features
75mV dropout voltage PMIC - Power Management ICs subtageroy The maximum operating temperature of -40°C
MIC61150YML-TR Applications
There are a lot of Microchip Technology MIC61150YML-TR Linear Voltage Regulators applications.