The package is delivered in a Tube case. In order to package the IC voltage regulator, a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad case is used. This IC Regulator has a type of output called Adjustable. There are 1 regulators implemented in this electroic component. Surface Mount can be adjusted in the Linear IC in order to vary the temperature range over which Linear Regulator operates. The IC voltage regulator must be maintained at -40°C~85°C degrees for it to function. As you can see, this regulator's output function is configured to be Positive. At present, it can produce an output of up to 1.5A. As you can see, the regulator IC has a total of 10 pins. The regulator has a total of 1 outputs to make sure that it delivers prompt, sufficient outputs. A dropout voltage of 10 volts is what makes it a dropout voltage. Depending on the chip, 10 pins may be available. For your information, part number MIC61150 is the basic part number for this voltage regulator IC. As you can see, this regulator IC represents a typical PMIC - Power Management ICs component. As far as the regulator type, it is a ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR type. There is a maximum output current of 1.5A for this regulator to meet the operational requirements. The -- Series is a series of products made by D-Link. As a general rule, it is recommended that you use the IC voltage regulator when temperatures are below 85°C degrees Celsius. At the lowest operating temperature that can be reached by the chip, it is -40°C. In regards to tolerance, this voltage regulator IC has an 1 % tolerance, which is quite low.
MIC61150YMME Features
75mV dropout voltage PMIC - Power Management ICs subtageroy The maximum operating temperature of -40°C 1 % tolerance
MIC61150YMME Applications
There are a lot of Microchip Technology MIC61150YMME Linear Voltage Regulators applications.