MIC803-40D3VM3-TR Overview

Packaged in the form of a Tape & Reel (TR), power management is easy to use. In this IC management you will find TO-236-3, SC-59, SOT-23-3 functions for you to refer to. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. A supply voltage of 1 is used to conduct the PMIC chip. The mount is provided by Surface Mount. 3 pins are present on the power management system. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Surface Mount mounting is recommended. It is recommended that the supervisor be set to this temperature: -40°C~125°C TJ. Power management has an output of Open Drain or Open Collector during operation. There is a 4.5μA supply current present in the power management. A similar IC managements number of the manufacturer can always be found by using MIC803, the base power ics number.

MIC803-40D3VM3-TR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
4.5μA operating supply current

MIC803-40D3VM3-TR Applications

There are a lot of Microchip Technology MIC803-40D3VM3-TR Voltage Supervisors applications.

• Insulation fault location system
• Detection of phase imbalance
• Analog circuit
• Battery-powered equipment
• Satellite navigation
• Power communication system
• Rechargeable batteries
• Dash board
• Electric heating appliances
• Transformer load monitoring equipment