MIC833YM5-TR Overview

For convenience, it is packaged in SC-74A, SOT-753 .There is a Open Drain output type for this comparator.Electronic comparator is shipped by Tape & Reel (TR) .The type of the chip can be classified as with Voltage Reference .Electronic comparator consists of 1 elements in total.The recommended mounting method is Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.The comparator has a pin count of 5 .You can find more pin-to-pin solutions by searching MIC833 .This component has a Surface Mount mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 1μA when using the device.Comparator electronics is not recommended to operate the system at a temperature above 85°C .Comparator electronics cannot be used at a temperature below -40°C .Comparator electronics is specified that the comparator's maximum supply voltage is 5.5V .A minimum supply voltage of 1.5V is permitted for this comparator.To ensure a high level of output quality, 1 channels work together.A comparator part from the IttyBitty® series is used in this part.

MIC833YM5-TR Features

Open Drain output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C

MIC833YM5-TR Applications

There are a lot of Microchip Technology
MIC833YM5-TR linear comparators applications.

• Lithium ion battery monitoring
• Battery management and protection
• Current and voltage sensing
• Analog front end
• Power management
• Point of load regulators
• DC/DC and AC/DC power supplies
• System control and monitoring
• Wearable Devices
• Mobile Phones and Tablets